| View previous topic :: View next topic |
| Author |
Message |
db4uf
n00b
Joined: 23 Jul 2004
Posts: 2
|
 Posted: Sun Aug 01, 2004 4:31 am Post subject: 39320 raid problem |
 |
|
| I'm running 2.6.7-r11 on a dual 2800MP system and the problem that I'm having is my adaptec 39320 scsi raid card with three drives attached to it in a raid 0 array will not show up as a device in Gentoo. When the system boots up it does not show any devices attached to the scsi bus. Yet when I remove the drives from the array they are then visible to Gentoo as sda, sdb and sdc. Is the hardware raid portion of the adaptec 39320 controller supported or is there something I'm missing? |
|
| Back to top |
|
 |
RAPUL
l33t
Joined: 29 Dec 2002
Posts: 664
Location: Valencia (SPAIN)
|
| Posted: Fri Nov 19, 2004 6:20 pm Post subject: Use any 2.6.10 kernel. |
|
|
Use any 2.6.10 kernel.
I have just installed a Dell server with an Adaptec 39320.
And linux-2.6.10-rc2 from www.kernel.org allowed me to see the scsi drives.
None of 2.6.9 worked for me.
_________________
Entropy rulz world.
Redundancy sux.
World is full of redundancy.
World sux. |
|
| Back to top |
|
|
Macguyvok
n00b
Joined: 09 Mar 2004
Posts: 54
Location: ....right behind you....
|
| Posted: Mon Dec 20, 2004 8:41 pm Post subject: |
|
|
I have the same problem. The only way I could get it to read my card at all was to use a 2.6.10 kernel... however, it doesn't read my raid array. (I get sda1,2,3, but the partitions won't mount, and FDISK complaines about the partitions extending onto another disk.
So, how do I get it to like my raid-0 array?
_________________
--Mac
"The DM is GOD!" No.... God's just my little NPC 
Coconut falls from sky... Take 2 points damage! |
|
| Back to top |
|
|
RAPUL
l33t
Joined: 29 Dec 2002
Posts: 664
Location: Valencia (SPAIN)
|
| Posted: Tue Dec 21, 2004 7:17 am Post subject: |
|
|
| Macguyvok wrote: | I have the same problem. The only way I could get it to read my card at all was to use a 2.6.10 kernel... however, it doesn't read my raid array. (I get sda1,2,3, but the partitions won't mount, and FDISK complaines about the partitions extending onto another disk.
So, how do I get it to like my raid-0 array? |
Use software RAID.
It is quite easy.
_________________
Entropy rulz world.
Redundancy sux.
World is full of redundancy.
World sux. |
|
| Back to top |
|
|
|
Other Things Gentoo
